Blackmagic Micro Converters
Micro Converter SDI to HDMI 3G
With Micro Converter SDI to HDMI 3G you can connect a huge range of HDMI displays and
video projectors to SDI based equipment. Your Micro Converter SDI to HDMI 3G automatically
detects between SD/HD/3G-SDI and converts to HDMI with embedded audio. This model can
also display a 3D LUT on both the HDMI and SDI loop output.
This tiny broadcast quality converter is protected by a strong aluminum chassis and powers
over USB-C, meaning you can power your Blackmagic Micro Converter via your laptop or
television’s USB connector using a USB-C cable. USB-C cables are used to connect some cell
phones to chargers and laptops, so if you have one of these, you can use the same cable. If the
USB connector on your cable is a different type, the correct cable can be purchased from most
electronic equipment stores.
SDI IN
Micro Converter
SDI to HDMI 3G
SDI LOOP OUT
HDMI OUT
1
3
2
4
Connectors
1
SDI IN
Primary SDI input BNC connector. The small 'lock' LED next to the BNC connector will
illuminate when an SDI input is detected and the HDMI output is connected. When
flashing, the LED indicates an SDI input is present, but no HDMI output has been
detected. If the LED lock light is off no SDI input or HDMI output is present.
2
SDI LOOP
Loop through output of your SDI input BNC connector.
3
USB-C / POWER
Connect 5V power using a standard USB to USB-C cable. Also connects to Blackmagic
Converters Setup software via your Mac OS or Windows Computer. A small white LED
light next to the USB-C port will illuminate when connected to a power source.
4
HDMI OUT
HDMI type A video output.
Blackmagic Converters Setup Settings
The Blackmagic Converters Setup utility can be used to change settings and update your Micro
Converter’s software. You can access these settings by moving between the ‘setup’ and
‘LUTs’ tabs.
The ‘setup’ tab features the unit name and software version along with HDMI output levels and
audio mapping options for 5.1 surround.
Blackmagic Micro Converters
15