When conversion processing is set to OFF the HDMI and SDI outputs become loop outputs so
you can feed the input signal to other HDMI and SDI equipment.
SDI OUT
SDI OUT
HDMI IN
REF IN
SDI LOOP
SDI IN
HDMI OUT
POWER
+6 to 36V
UpDownCross HD
1
3
4
6
2
8
9
7
Connectors
1
SDI IN
SDI input. The small LED next to the BNC connector illuminates when a locked SDI
signal is detected. When both SDI and HDMI inputs are connected, the SDI input
takes priority.
2
SDI LOOP
Direct loop output of your SDI input video.
3
HDMI IN
HDMI type A video input. A small LED next to the HDMI IN connector illuminates to
show when it detects a valid HDMI input.
4
REF IN
Reference video input. A small LED next to the REF IN connector indicates the
reference lock status:
Constant white
- the REF IN matches the format of the output video format set on the
converter.
Flashing white
- the REF IN is a valid video format but doesn’t match the output video
format set on the converter.
5
USB-C Port
Connects to the Converters Setup software via your Mac OS or Windows computer.
The Mini Converter’s internal software is also updated using the USB port.
6-7
SDI OUT
SDI video output BNC connectors.
8
HDMI OUT
HDMI type A video output.
9
POWER +6 to 36V
6 to 36 volt power supply input. The support screw can be secured to the unit’s power
connector to prevent accidental disconnection. A small LED next to the DC input jack
illuminates to show when power is connected.
Blackmagic Mini Converters
92
