デベロッパーの皆様へ
Developer Information
Controlling Ultimatte using Telnet
The Blackmagic Ultimatte 12 Ethernet Protocol gives you the freedom to build your own custom
control solutions for your Ultimatte 12. For example, you can create your own software
application and control your Ultimatte 12 via Ethernet from your computer.
The first step is to connect your Ultimatte to your computer via Ethernet. You can do this by
connecting Ultimatte to the same network your computer is connected to, or you can connect
Ultimatte directly to your computer.
If your network settings are set correctly, you can now open the Terminal application on
Mac OS, or enable Telnet command line utilities on Windows and enter Ultimatte control
protocol commands. These commands can be programmed into your application and triggered
by related items on a custom user interface of your own design.
Below is a basic example of using Telnet to change the backing color, restore to factory
defaults, and adjust the matte density control.
1
In the Terminal application, type the following:
telnet (IP address of main unit (space) port number)(enter)
For example: telnet 192.168.10.220 9998
Press ‘enter’.
A list of status information will appear and you are ready to control your Ultimatte.
2 Now type the following:
control:(press enter)
backing color: blue(press enter twice)
Terminal will acknowledge the action with ‘ack’ and confirm it so you know your setting
has been performed.
You have now changed Ultimatte 12’s backing color to blue.
3 To restore to factory defaults, type the following:
control:(press enter)
factory defaults: yes(press enter twice)
This restores your Ultimatte to factory default settings and performs an automatic composite.
4 To adjust the matte density setting, type the following:
control:(press enter)
matte density: 273(press enter twice)
Terminal will acknowledge and confirm the action.
You have now adjusted the matte density setting.
NOTE
If
Ultimatte
12
is
connected
directly
to
your
computer,
set
your
computer
to
a
manual
static
IP
address.
Set
the
first
three
blocks
of
numbers
in
the
IP
address
to
match
your
Ultimatte
12
and
set
the
subnet
mask
to
255.255.255.0.
You
can
leave
the
gateway
or
router
setting
blank
as
it
will
not
be
used
in
a
direct
connection
between
your
computer
and
Ultimatte
12.
117
Summary of Contents for Smart Remote 4
