Attaching the extension arm
B4 lenses typically feature a handgrip on the lens body, so a side handle isn't necessary when
shooting with URSA Broadcast on your shoulder.
If you have a different lens mount fitted, however, you may find it useful to fit the optional URSA
Mini side handle on an extension arm for comfortable shoulder based shooting.
URSA Mini Shoulder Mount kit comes with an extension handle and longer LANC cable to move
the optional side handle to a more ergonomic position.
To attach the side handle extension arm:
1
Place your URSA Broadcast on a flat, stable surface allowing room next to the camera
to lower the extension arm. Mounting URSA Broadcast to a tripod is helpful for
this purpose.
2
Attach the indented end of the extension arm to the baseplate rosette, lower the arm to
suit, and fasten with the supplied rosette thumbscrew.
3
Attach the side handle to the extension arm’s front rosette. Fasten by tightening the
side handle screw with the large flat head screwdriver, or by twisting the D ring with
your thumb and forefinger.
4
Connect the side handle LANC output to the camera LANC input using the long LANC
cable supplied with your shoulder mount kit.
You can easily adjust the extension arm and side handle to suit your preference by loosening
the rosette screws, making your adjustment, then retightening.
With your URSA Mini Shoulder Mount Kit now attached, you have additional speed for fast
shooting on the run, plus the ability to quickly mount your camera on a tripod for tight,
stable shots!
AUDIO IN
2
SDI OUT
12V OUT
SDI OUT
SDI IN
12V
REF IN
TC IN
Connect the side handle to the camera using
the long LANC cable supplied with the kit
Side handle
Side handle extension arm
Extension arm attaches
to baseplate rosette
Tighten via side
handle screw
112
URSA Mini Shoulder Mount Kit