Regulatory Notices and Safety Information
Regulatory Notices
Disposal of waste of electrical and electronic equipment within the European union.
The symbol on the product indicates that this equipment must not be disposed of with
other waste materials. In order to dispose of your waste equipment, it must be handed
over to a designated collection point for recycling. The separate collection and
recycling of your waste equipment at the time of disposal will help conserve natural
resources and ensure that it is recycled in a manner that protects human health and the
environment. For more information about where you can drop off your waste
equipment for recycling, please contact your local city recycling office or the dealer
from whom you purchased the product.
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. Operation of this product in
a residential area is likely to cause harmful interference, in which case the user will be
required to correct the interference at personal expense.
Operation is subject to the following two conditions:
1
This device may not cause harmful interference.
2
This device must accept any interference received, including interference that may
cause undesired operation.
Safety Information
The supplied AC to 12V DC power supply must be connected to a mains socket outlet
with a protective earth connection.
This equipment is suitable for use in tropical locations with an ambient temperature
of up to 40ºC. During sunny conditions, consider shading of the camera to prevent
exposure of the camera or Lithium battery to extended periods of sunlight. Keep
Lithium batteries away from all sources of heat.
The 12V DC output connector is suitable to provide power to the Blackmagic URSA
Viewfinder or Blackmagic URSA Studio Viewfinder. When connecting other accessories
to this connector, ensure that the power consumption is less than 18W.
No operator serviceable parts inside. Refer servicing to your local Blackmagic Design
service centre.
t
NOTE:
This is only
to appear
in the Korean
manual.
231
231
Regulatory Notices and Safety Information
