Battery Display
Your URSA Broadcast can change the way the battery level indicator displays the remaining
charge. The two settings are ‘percentage’ and ‘voltage.’ When using a battery and plates that
support percentage accurate levels, setting ‘battery display’ to ‘percentage’ will show your
battery power remaining as a percentage.
If your battery and plate combination does not support percentage accurate readings, the
display will show four bars which empty as the battery depletes.
If this option is set to ‘voltage,’ battery levels will be displayed in volts. We recommend that you
swap the battery as it approaches 12V.
Display ND Filter As
Use this setting to adjust how the ND filter indicator on your URSA Broadcast displays your
ND filter setting. Each setting corresponds to a different camera convention. Cinematographers
typically use ND.number notation, while those familiar with DSLRs or broadcast cameras may
prefer this information in f-stop format, or as a fraction of available light. These options are
available here as 'number,' 'stop,' and 'fraction,' respectively.
Setup menu in URSA Broadcast with the option to customize
how the ND filter information is displayed
NOTE
The characteristics of individual light sources may still cause flicker even when
using flicker free speeds. We recommend always performing a test shoot when not
using continuous lights.
New text revised
after translation,
check with
translations.
TIP
A list of batteries that support percentage accurate power information is provided
in the ‘mounting batteries’ section of this manual.
TIP
You can also toggle between 'voltage' and 'percentage' battery displays by
tapping the power icon on the LCD touchscreen.
86
Settings