Removing the B4 Mount
To remove the B4 mount, simply unscrew the five M3 Hex screws using a 2mm Hex driver.
ND
FILTER
AUTO
W/B
LENS
SDI OUT
12V OUT
0.10
ND
FILTER
AUTO
W/B
LENS
SDI OUT
12V OUT
The original B4 mount is easily removed by unscrewing the five
M3 Hex screws and gently lifting the mount from the camera body
Keep reading this section for details about the PL, B4, and EF lens mount kits and how to install
each mount to your URSA Broadcast.
Blackmagic URSA Mini Pro EF Mount
The EF mount lets you attach EF stills lenses to your URSA broadcast.
The EF mount kit includes:
1x EF mount
The EF mount lets you attach common EF
stills lenses.
1 x Shim set
The shim set includes the following thicknesses:
0.50mm
0.30mm
0.20mm
0.18mm
0.15mm
0.12mm
0.10mm
0.05mm
0.025mm
1x Baffle tool
The baffle in the EF mount is not removable,
however we have included a baffle tool in the
EF kit as a spare item you can use if you also have
the PL mount.
4 x 2mm Hex M3 x 18mm mount screws
The four M3 x 18mm Hex screws are exclusive to
the EF mount so you can keep the screws together
with the respective mount.
NOTE
When removing the original B4 mount, make sure the 0.10mm and shim
underneath the mount always stays attached to your camera.
166
Interchangeable Lens Mount