background image

BLACKMER POWER PUMPS 

960400

 

INSTRUCTIONS. 501-A00_1103 

INSTALLATION OPERATION AND MAINTENANCE INSTRUCTIONS

DISCONTINUED

 

MODELS

: LGF1D, LGB1D, LGF1PD, LGB1PD,

 

Section 

Effective 

Replaces 

501 
Mar 2011 
Aug 2010 

LGF1C, LGB1C, LGF1PC, LGB1PC 

 

 

 

 

TABLE OF CONTENTS 

Page

 

PUMP DATA

 

 Technical 

Data ...................................................... 2 

 

Initial Pump Start Up Information ........................... 2 

INSTALLATION

 

 Pre-Installation Cleaning ....................................... 3 
 Location 

and 

Piping ............................................... 3 

 

Pump Relief Valve and Bypass valve .................... 3 

 Check 

Valves ........................................................ 4 

 Mounting ............................................................... 4 
 Coupling 

Alignment ............................................... 4 

 Pump 

Rotation....................................................... 4 

OPERATION

 

 

Pre-Start Up Check List ......................................... 5 

 

Start Up Procedures .............................................. 5 

 

Relief Valve Setting and Adjustment ..................... 5 

MAINTENANCE 

Strainers ...................................................................  6 
Lubrication ................................................................ 6 
Vane Replacement ................................................... 7 
Pump Disassembly .................................................. 7 
Parts Replacement ................................................... 8 
Pump Assembly ....................................................... 8 

TROUBLE SHOOTING

 ................................................. 11 

 

Numbers in parentheses following individual parts indicate 
reference numbers on Blackmer Parts List No. 501-A01. 

Blackmer pump manuals and parts lists may be obtained from 
Blackmer's website (www.blackmer.com) or by contacting 
Blackmer Customer Service. 

SAFETY DATA 

 

This is a SAFETY ALERT SYMBOL. 

When you see this symbol on the product, or in the manual, 
look for one of the following signal words and be alert to the 

potential for personal injury, death or major property 

damage 

 

Warns of hazards that WILL cause serious personal injury, 

death or major property damage. 

 

Warns of hazards that CAN cause serious personal injury, 

death or major property damage. 

 

Warns of hazards that CAN cause personal injury 

or property damage. 

NOTICE: 

Indicates special instructions which are very 

important and must be followed. 

 

 

NOTICE: 

Blackmer liquefied gas pumps MUST only be 
installed in systems which have been designed by 
qualified engineering personnel. The system MUST 
conform to all applicable local and national 
regulations and safety standards. 

This manual is intended to assist in the installation 
and operation of the Blackmer liquefied gas pumps, 
and MUST be kept with the pump. 

Blackmer liquefied gas pump service shall be 
performed by qualified technicians ONLY. Service 
shall conform to all applicable local and national 
regulations and safety standards. 

Thoroughly review this manual, all Instructions and 
hazard warnings, BEFORE performing any work on 
the Blackmer liquefied gas pumps. 

Maintain ALL system and Blackmer liquefied gas 
pump operation and hazard warning decals. 

 

 
 

Summary of Contents for LGB1C













Reviews: