BLACKMER ProVane PV6B, Installation, Operation And Maintenance Instructions

111-B00    Page 2/16 

SAFETY DATA 

Failure to disconnect and lockout 
electrical power or engine drive before 
attempting maintenance can cause 
severe personal injury or death 

Failure to disconnect and lockout 
electrical power before attempting 
maintenance can cause shock, burns or 
death 

Hazardous 

machinery can 

cause serious 

personal injury.

Hazardous voltage. 

Can shock, burn or 

cause death.

If pumping hazardous or toxic fluids, 
system must be flushed and 
decontaminated, inside and out, prior to 
performing service or maintenance 

Disconnecting fluid or pressure 
containment components during pump 
operation can cause serious personal 
injury, death or major property damage 

Hazardous or toxic 

fluids can cause 

serious injury. 

Hazardous pressure 

can cause personal 

injury or property 

damage

Operation without guards in place can 
cause serious personal injury, major 
property damage, or death. 

Failure to relieve system pressure prior 
to performing pump service or 
maintenance can cause personal injury 
or property damage. 

Do not operate 

without guard  

in place 

Hazardous pressure 

can cause personal 

injury or property 

damage 

PUMP DATA 

PUMP IDENTIFICATION 

A pump Identification tag, containing the pump serial number, I.D. number, and model designation, is attached to each pump.  It is 
recommended that the data from this tag be recorded and filed for future reference. If replacement parts are needed, or if 
information pertaining to the pump is required, this data must be furnished to a Blackmer representative.

TECHNICAL DATA 

Pump Size 

6, 8 

Maximum Pump Speed 

3600 RPM 

Flow Rate at Max. Pump speed 

6-8 GPM  (23-30 LPM) 

Maximum Operating Temperature 

240°F (116°C) 

Maximum Viscosity 

5, 000 SSU (1100 cP) 

Maximum Differential Pressure 

125 psi  (8.6 Bar) 

Maximum Working Pressure 

200 psi (13.8 Bar) 

Technical Data is for standard materials of construction.  
Consult Blackmer Material Specs for optional materials of 
construction 

INITIAL PUMP START UP INFORMATION 

Model No.:  ______________________________________ 

Serial No.:   ______________________________________ 

ID No.:  _________________________________________ 

Date of Installation:   _______________________________ 

Inlet Gauge Reading:  ______________________________ 

Discharge Gauge Reading:  _________________________ 

Flow Rate: 

 ______________________________________