9
8
Front Panel
1. Input
Plug your guitar in here. Always use a good quality screened guitar lead.
Clean Channel
2. Bright Clean Mode Indicator
When the green LED is on Bright Clean Mode is selected.
3. Bright Clean Mode Select
Press this switch to select the Bright Clean Mode.
4. Warm Clean Mode Indicator
When the yellow LED is on Warm Clean Mode is selected.
5. Warm Clean Mode Select
Press this switch to select the Warm Clean Mode.
6. Clean Gain
The Clean Gain control adjusts the amount of the Clean Channel’s overdrive or
distortion. Low settings, counter clockwise, will deliver a clean sound. As the Clean
Gain control is increased clockwise the sound will begin to break-up, delivering a
subtle overdrive.
7. Clean Volume
This controls the volume of the Clean Channel. Turning it clockwise increases the
volume.
The Bright and Warm modes reconfigure both preamplifier and power amplifier
circuits to deliver Class A or Class AB style tones.
The table below describes the operation of the two modes:
English
English
Overdrive Channel
8. Crunch Mode Indicator
When the orange LED is on Crunch Mode is selected.
9. Crunch Mode Select
Press this switch to select Crunch Mode.
10. Super Crunch Mode Indicator
When the red LED is on Super Crunch Mode is selected.
11. Super Crunch Mode Select
Press this switch to select Super Crunch Mode.
12. Overdrive Gain
The Overdrive Gain control adjusts the amount of the Overdrive Channel’s overdrive or
distortion. Low settings, counter clockwise, will deliver a clean sound on the edge of
break-up. As the Overdrive Gain control is increased clockwise the sound will become
more overdriven, moving through beautiful crunch tones until, at its maximum position,
a full distorted tone is arrived at.
13. Overdrive Volume
This controls the volume of the Overdrive Channel. Turning it clockwise increases
the volume.
Equalisation
14. Bass
The Bass control adjusts the amount of low-end frequencies in your tone. This amp
has an advanced tone shaping circuit which allows the tone to be tight and cutting,
counter clockwise, to warm and thumping, clockwise.
15. Middle
The Middle control adjusts the amount of middle frequencies in your tone. The middle
frequencies are particularly important in setting the amount of ‘body’ your tone has.
With the Middle control set to its minimum position (fully counter clockwise) the sound
will be aggressive and scooped, a tone ideal for aggressive rhythm playing. As the
Middle control is increased (clockwise) the amount of ‘body’ is increased, which is
more suitable for sustained lead guitar tones.
Mode
Preamp Character
Power Amp Damping Use For
Bright Clean
Tighter bass, chiming mids
Low (greater emphasis Ringing clean and
and highs
on lows and highs)
jangly rhythm
Warm Clean
Looser bass, glassy highs
Medium (tighter
Warm cleans and crunchy
bottom-end for crunch) rhythms
