English
16
Rear Panel
28. Mains Input
The supplied detachable mains lead is connected here. The lead should only
be connected to a power outlet that is compatible with the voltage, power and
frequency requirements stated on the rear panel. If in doubt, seek advice from a
qualified technician.
Programmability
Storing Patches
To store the current sound as a patch:
1. Press and hold any of the four Channel switches for one second. All four
Channel LEDs will begin to flash.
2. Press the Bank switch to toggle through the three banks (green, orange, red)
to choose the store location.
3. Press any of the four Channel switches once to store the patch in the chosen
location.
The LED corresponding to the chosen store location will illuminate and the new
patch will be active.
Green bank = Patches 1-4
Orange bank = Patches 5-8
Red bank = Patches 9-12
The amplifier controls can be used to edit the patch at any stage of the store
process.
Press the Manual switch at any stage to cancel the store process and return the
amplifier to the last state.
Storing a patch will overwrite any previous patch in that location.
Patches can also be stored via Blackstar’s INSIDER software or a connected
Blackstar FS-10 footcontroller.
Recalling Patches
Press any Channel switch to load that patch.
Pressing the Bank switch will cycle through the three banks – green-orange-red.
The Channel will be preserved, therefore the corresponding patch within the current
Bank will be loaded when scrolling through the Banks.
Alternatively, patches can be recalled via Blackstar’s INSIDER software or any
connected footcontroller.
Factory Patches Table
Green Bank - Live Rig 1
Channel Patch Name
Voice
Response
Effect(s)
Description
CH1
LR1 - Clean
Clean Warm
6L6
Spring Reverb
US clean with high
headroom, perfect as a
platform for your pedals
CH2
LR1 - Crunch
Crunch
EL34
Hall Reverb
British low gain crunch with
natural reverb
CH3
LR1- Rhythm
Super Crunch EL34
Tape Delay, Hall
Reverb
British classic rock crunch,
ideal for guitars with
humbuckers
CH4
LR1 - Lead
OD 1
KT88
Analogue Delay
Full sounding dynamic lead
Orange Bank - Live Rig 2
Channel Patch Name
Voice
Response
Effect(s)
Description
CH1
LR2 - Clean
Clean Warm
6V6
Plate Reverb
US low wattage 'sag' clean
tone with natural reverb
CH2
LR2 - Crunch
Clean Bright
KT66
Hall Reverb
Rhythm tone with breakup,
great for a classic Indie
sound
CH3
LR2- Rhythm
OD 1
EL84
Hall Reverb
Smooth drive with a slight
mid boost
CH4
LR2 - Lead
Super Crunch 6L6
Analogue Delay,
Hall Reverb
Balanced lead tone with
delay, perfect for solos
Red Bank - Live Rig 3
Channel Patch Name
Voice
Response
Effect(s)
Description
CH1
LR3 - Clean
Clean Bright
KT88
Flanger,
Analogue Delay,
Hall Reverb
Modulated clean tone,
ideal for appegiated
chords
CH2
LR3 - Crunch
Crunch
EL84
Plate Reverb
Dynamic crunch, perfect
for big open chords
CH3
LR3- Rhythm
Super Crunch 6V6
Analogue Delay,
Plate Reverb
Compressed crunch, great
for rhythm playing
CH4
LR3 - Lead
OD 2
KT88
Analogue Delay,
Hall Reverb
Smooth high gain tone,
ideal for legato whilst
maintaining note definition
English
17
Summary of Contents for SILVERLINE Series
