DR900X-1CH Plus I DR900X-2CH Plus
15
Turn off the engine. The dashcam will automatically stop recording and power
down. To record in parking mode while the engine is off please connect the
Hardwiring Power Cable (included in the box) or install a
Power Magic Battery
Pack
(sold separately). A
Hardwiring Power Cable
uses the automotive battery
to power your dashcam when the engine is off. A low voltage power cut-off
function and a parking mode timer to protect the automotive battery from
discharge is installed in the device. Settings can be changed in the BlackVue App
or Viewer.
Locate the fuse box to connect the hardwiring power cable.
Note
y
Location of the fuse box differ by manufacturer or model. For details, refer to
the vehicle owner's manual.
-
1
After removing fuse panel cover, find a fuse that powers on when engine
is turned on(ex.cigarette lighter socket, audio, etc) and another fuse that
remains powered on after the engine is turned off (ex.hazard light, interior
light). Connect the ACC+ cable to a fuse that powers on after engine start,
and BATT+ cable to a fuse that remains powered on after engine is turned
off.
Note
y
To use battery saver feature, connect the BATT+ cable to the hazard light
fuse. Functions of fuse differ by manufacturer or model. For details refer
to the vehicle owner's manual.
ENGLISH
