background image

CODE IDENTIFICATION & FACTORY RESET

Code Identification:

To identify any of your programmed codes, follow the steps below. 

1. Press and hold the               button until the        button lights up red.

The       button’s red indicator light remains on.

2. Select a device from 

Device Categories

 that you would like the code 

for. The        button’s red indicator light blinks once and remains on.

3. Press the         button. The        button’s red indicator light blinks once 

and remains on.

4. Press the       button. Count the number of times the        button’s red 

indicator light flashes. This is the number corresponding to the first 

digit of the code. If the        button does not flash, the corresponding 

code number is 0. Repeat the process by pressing the       ,       and       

buttons for the remaining digits.

5. Press the         button to exit.

NOTE:

 Press           to exit at any time.

Reset to Factory Settings:

1. Press and hold the               button until the        button lights up red.

The       button’s red indicator light remains on.

2. Press the       button. The        button’s red indicator light blinks once 

and remains on.

3. Press the  

OK

  button. The        button’s red indicator light will flash twice 

and the remote will revert to factory settings.

PROGRAM

1

2

3

4

PROGRAM

A

A

A

13

Summary of Contents for BWA18AV007



























Reviews: