BLUETOOTH
®
SPEAKER
With color-changing
LED lights
PRODUCT GUIDE
Model: BWA19AAS91
POWER:
Press and hold the power button for 2 seconds to turn device on or off.
VOLUME UP +:
Short press (< 0.5s) the Volume Up button to turn up volume.
Press and hold the Volume Up button (2s) to go to the next track.
VOLUME DOWN –:
Short press (< 0.5s) the Volume Down button to turn down volume. Press and hold
the Volume Down button (2s) to go to the previous track.
INDICATOR LIGHT STATUS:
Power on
– When the speaker is turned on, a solid blue light will appear momentarily.
Bluetooth pairing indicator
– When the speaker is turned on, a flashing blue light
indicates the speaker is ready to pair. Once paired, the light will begin blinking every
5 seconds.
Power off
– When the speaker is turned off, the indicator light will turn off.
Battery charging
– While speaker is charging, the indicator light will turn solid red. Once
the speaker is fully charged, the light will turn off.
SPEAKER PAIRING:
To pair the speaker:
1. Make sure the smartphone, tablet, or computer you’re using with the speaker has
Bluetooth.
2. Turn on the speaker (press and hold the power button for 2 seconds) and look
for the small blinking light.
3. Find the
BW COLOR SPK M
speaker in your device’s Bluetooth list, and select.
The device and
Bluetooth
will find each other every time, so long as the speaker is set
to
Bluetooth
and your device’s
Bluetooth
is on.
Auto-off: If the speaker is on but is not connected to
Bluetooth
, it will shut down after
2 minutes. Once paired, the speaker will automatically shut down if paused for 15
minutes or more.
DISCONNECTING DEVICE:
Press the button for up to 2 seconds to disconnect the speaker from the device
and enter into pairing mode.
LIGHT PROGRAMS:
Press the
button to cycle through the light programs
Program 1: Slow fade color transition
Program 2: Fast color change
Program 3: Color select. Stops on the current color
Program 4: Move to the beat
Program 5: Candle flicker
Program 6: Color movement
Program 7: No lights
AUX-IN
Indicator Light
USB Charging Port
AUX-IN MODE:
Plug one end of the cord into the speaker and the other into the headphone jack on
your device. Press play. (
NOTE:
The speaker must be on in order to play.)
USB CABLE:
25 cm micro-USB cable.
Ver.01 Rev.12/28/18
Ver.01 Rev.12/28/18
Ver.01 Rev.12/28/18
Ver.01 Rev.12/28/18
Power
Play/Pause
LED Program Selector
Volume Down/
Previous Track
Volume Up/
Next Track
