STEP 5
Slide the seat post (4) into the main frame (1) and secure it with the spring loaded knob.
Securely attach the seat (64) to the seat bar (5). Slide the seat bar (5) into the seat post (4) and
tighten the spring loaded knob to secure it
STEP 6
Carefully thread the pedals onto the crank arms.
The right-hand pedal, marked with the letter
(R),screws onto the right-hand crank, also marked
with an (R). First, hand turn the pedal onto the
crank in a clockwise direction until tight, then use
wrench to tighten further.
The left-hand pedal, marked with the letter
(L),screws onto the left-hand crank, also
marked with an (L). First hand turn the pedal onto
the crank in a counterclockwise direction, then use
wrench to tighten further.
Notice
: When tightening, both of the pedals
should be turning toward the front of the bike
11
ASSEMBLY INSTRUCTIONS (cont’d)
Tightening
Direction
