14
STEP 2
ATTACHING THE HANDLEBAR
A) slide handlebar post (92) into the main frame (5) and tighten the knob (44) to secure
B) adjust the angle of handlebar to required position and tighten screws to fix. It’s important
that the tooth of handlebar post and handlebar should be matched before tightening.
C) insert computer (52) to computer holder (55) and insert cable (53) plug into the back hole
of the computer (52)
D) remove the two bolts (30) on the frame. Position the bottle holder (29) then tighten the
bolts.
75
13
92
44
5