background image

 29 

WARRANTY

LIMITED ONE (1) YEAR PARTS AND LABOR

For ONE (1) YEAR from date of purchase, by original consumer purchaser, BH North 

America will repair or replace, at its option, free of charge parts and/or labor which are 

defective as a result of material or workmanship, with the exception of any cosmetic 

component which will be covered for NINETY (90) days from the date of purchase. 

Any component that is a customer point of assembly will only be replaced; labor is not 

covered.

COMMERCIAL OR RENTAL USE

If a Bladez product is used for commercial or rental purposes the warranty is void.

THIS WARRANTY DOES NOT COVER

•  Pre-delivery set-up.

•  Components that require replacement due to dirt or lack of regular maintenance.

•  Expendable items which become worn during normal use.

•  Repairs necessary because of operator abuse or negligence or the failure to operate 

and maintain the equipment according to the instructions contained in the Owner’s 

Manual.

Bladez Fitness/BH North America Corporation

20155 Ellipse

Foothill Ranch, CA 92610

Phone: 949.206.0330; Toll Free: 866.325.2339; Fax: 949.206.0013

Email: fitness@bhnorthamerica.com

Web: www.bhnorthamerica.com

Mon - Fri 8am - 5pm PST

This Product Is Made In China

FOR WARRANTY REPAIRS, PLEASE DO NOT TAKE YOUR MACHINE 

BACK TO THE RETAIL STORE. CONTACT BLADEZ FITNESS FIRST.

Summary of Contents for METRON GS






























Reviews: