2.5 GAS VALVES MAINTENANCE AND CLEANING
If the gas valve is hard to turn, do not force it. It might need lubricating.
This operation must be executed always by qualified and authorized tradesperson.
To access the valves, pull burner heads and remove the cooking top.
To lubricate the valves, follow these instructions.
- With a screw-driver, remove the cover.
- Pull the cone out of its housing.
- Clean the cone with a dry lint-free cloth
- Lubricate the cone carefully, with grease recommended (Molykote, Staburgs N32, Rocol HT,
Optitemp HT2 EP), and take off the excess grease to avoid obstructing the gas passages.
- Introduce the cone and the spring and screw the cover.
- Turn the cone several times, to ensure it is not hard.
- Check for gas leaks, with the tap opened and closed.
NEVER USE A FLAME.
Do not modify this appliance.
BEFORE LEAVING
Check all connections for gas leaks with soap and water. DO NOT use a naked flame for
detecting leaks. Ignite all burners to ensure correct operation of gas valves, burners and ignition.
Turn gas taps to low flame position and observe stability of the flame. When satisfied with the
cooker, please instruct the user on the correct method of operation. In case the appliance fails to
operate correctly after all checks have been carried out, please call TECHNICAL SERVICE.
Summary of Contents for FD6064WX
Page 24: ...TECHNICAL CHARACTERISTICS ...