23
7.2.8 Menu ”Level”
In the first section you can enable or disable the loop through
output. If enabled, select the nominal level for all 8 channels
in the range from 64 ... 82 dBµV. If the loop is disabled, the
output level of the 8 channels can be set in the range of 76 ...
94 dBµV.
Furthermore each channel can be set individually with an
offset of +3 ... -6 dB in 0.5 dB steps.
The buttons simplify the offset level setting if you want to
make the same adjustments for all channels. The left button
increases the offset by 0.5 dB, the right button decreases
the value by 0.5 dB. The middle button set the offset of all
channels to 0 dB.
7.2.9 Menu ”Status”
7.2.9.1 A-QAMOS-CT status table
It shows an overview of the status of the various components per channel, updated every 5 seconds. Listed are only the current
values. Mouse over the parameter to display its name in the help box or in the status bar of the browser (according to your
configuration).
