23
8-fold IP-/ ASI-TV Modulator
IP/ SFP/ ASI (H.264/ AVC, MPEG2)
→
4x CI
→
ATV (8x AM)
A-PALIOS-IPM4CI
Part N
o
: 5113.81 / 5113.83
8.2.11 Menu ”Status”
It shows an overview of the status of the various components per channel, updated every 5 seconds. Listed are only the current values.
mouse over the parameter to display its name in the help box or in the status bar of the browser (according to your configuration).
The listing is in 3 groups: input, modulators and system.
With the drop-down menu at the top right, you select whether you get an overview (all) or if only one of the three groups is displayed.
8.2.12 Menu „Amplifier“
The amplifier can be set and used independently of the A-PALIOS-IPM4CI. It does not influence the device itself or other devices of the
headend. The adjustment range of amplification is between 15 .... 35 dB.
• amplifier deactivated:
• amplifier activated:
power consumption
0 W
power consumption
+14W
output level with loop
64 ... 82 dBµV
output level without loop 76 ... 94 dBµV + amplification (15 ... 35)
without loop
76 .... 94 dBµV
• internal SBL mode
The amplifier is fixed at +21 dB and is automatically integrated into the level display menu.
Thus the max. output level is at 118 dBµV.
In view of the deterioration of the signal to noise ratio the use of loop is not recommended.
• SET reference
The actual applied level is set as a reference. The status menu displays the level deviation of a value during operation.
