9
8-fold IP-/ ASI-TV Modulator
IP/ SFP/ ASI (H.264/ AVC, MPEG2)
→
4x CI
→
ATV (8x AM)
A-PALIOS-IPM4CI
Part N
o
: 5113.81 / 5113.83
8.2.2 Menu “IP input”
This is the menu for the network configuration of the streaming port and the eight IP transport streams, from which the eight desired
programs for transmitting can be selected.
First the configuration options for the two stream ports are displayed.Stream port 2 is only available after enabling the software option
(
»
chapter 8.2.8). The IP address, subnet mask and gateway is configured for each port.
The next step is to configure the setup parameters of the eight IP input transport streams (IP input channels). Again, IP address, port and
transport protocol (UDP or RTP ) have to be entered for each IP channel. Press the “
send
“ button to save the settings.
Unused ports are disabled by entering the IP address 0.0.0.0.
Identical settings within these 8 IP channels are not allowed and automatically marked red.
Note:
Some switchesapply configuration changes for the multicast group after the set query interval has expired.
Some switches ignore unsolicited IGMP join message. If the querier in the switch is set to a longer interval, the switch might ignore the
emitted IGMP message and thus the srtream is not transmitted instantly after the configuration changed. Upon expiration of the query
interval, the switch checks its membership in multicast groups. The device responds. The response is accepted by the switch, which
then transmits the stream to the device.
