Blankom-Encoder-EN-V3-2019-RR.docx
- 10 -
RRI 26. Februar 2019
h.264 VGA Encoder
：
HDMI CVBS HD Encoder
：
The interfaces of h.265 HDMI encoder and WIFI encoder are similar
：
The interfaces of h.265 SDI encoder and WIFI encoder are similar
：
The interfaces of h.264 VGA encoder and WIFI encoder are similar
：
From Left to Right:
A.
Power input----- 12V/DC
（
12V/1A
，
5V/2A optional
）
B.
RST=RESET button ------ useful to reset the device to factory defaults . After power on , press it for about 15
seconds to reset the device to default IP 192.168.0.31 (192.168.1.168 – depending on Model)
C.
AUDIO/Video input------ Input HD HDMI, SDI, VGA, Audio signals
D.
100 or 1000BaseT Ethernet port RJ45
E.
Status Indicator
：
1)
Will flash while pressing the RESET button. Reset is successful when the light turns off . Slow Flashing show:
Video input , image capturing and compression is working..
2)
If the indicator light keeps on, the Video source acquisition and compression has some problem like
resolution/format our out of Input specification. Sync failed...
3)
If the indicator LED flashes slowly but the output stream is not working , there might be a problem with the
streaming server part.
