Blankom-Encoder-EN-V3-2019-RR.docx
- 11 -
RRI 26. Februar 2019
WEB server –Access settings
Step 1: Reset & initialization
Connect the power supply to turn on the encoder and use a pin to press RST on the encoder for min. 10 seconds
(better 15), it will be restarted and initialized. The default Route IP of the WEB-IF is 192.168.0.31 or 192.168.1.168
(
This default Address may vary depending on model)
after initialization and can be recognized from the sticker at
the bottom:
Step 2: Change the administrator’s computer IP
Set the administrator’s computer IP as: 192.168.0.* or 192.168.1.*to avoid IP conflicting with the units own IP
address IP 192.168.0.*: (use an IP setting “*” in the number range between 2-254 except .0.31 or .1.168) Remark:
.0 is often the network router, .1 often the Gateway of the used router.
Step 3: Login the menu with the web browser:
Enter 192.168.0.31 (or 192.168.1.168) in your Browser window.
Default user Name: admin
Default password: admin
You are entering the STATUS window:
