5
AMB 307
Part N
o
: 9730.01
COFDM Modulator
ASI-TS
→
DVB-T (COFDM)
B
LINE
8. Programming by web server *
8.1 Main menu
Name of device, item number, module address in head end
Description
module name (max. 30 characters)
Transport stream
displays the priority of both TS, if hierarchical
modulation was selected (menu 1)
Input
TS-Input
displays ASI input respective selection of the
input of the second TS, if hierarch. modulation
was selected.
Status
display wether
SYNC
hronization or
noSYNC
hronisation with input
Data rate
displays the data rate of the TS
Output
Channel
channel selection : 2 ... 69, standard B/G,
2 ...134, standard M
Attenuation
adjustment range 0 ... 31.5 dB
RF signal:
selection: On/ Off
Transmission mode
selection: 2k/ 8k
Constellation
selection: 16 QAM, 64 QAM, QPSK
Bandwith:
selection: 5, 6, 7, 8 MHz
Guard intervall:
selection: 1/32, 1/16, 1/8, 1/4
Code rate:
selection: 1/2, 2/3, 3/4, 5/6, 7/8
Status
Operating mode
COFDM-Modulator
according adjustment menu 1
Hierarchical
modulation
according adjustment menu 1
Mode TS-Processing
DVB-Standard/ TNT-France according menu 1
NIT-Processing
On/ Off according adjustment menu 5
CAT-Processing
On/ Off according adjustment menu 5
Change TS-Identificat. On/ Off according adjustment menu 5
Program filter
On/ Off according adjustment menu 3
Data rate overview
see menu 4
Operating mode
selection: On/ Off/ Reset
SNMP-Trap message
selection: On/ Off, if SNMP option in HCBx00
enabled, otherwise “locked“ displays
Level monitoring
selection: On/ Off
Factory settings
setting the default values (see menu 9)
Routing to the appropriate adjustment menu
Extended settings
see menu 1
NIT table
see menu 2
Program filter
see menu 3
Table processing
see menu 5
Software overview
see menu 7
Status
see menu 8
* Further details on this are to be found in the HCB manual
