10
ATB 19x
Part N
o
: 9848.xx
ASI - TV Transmodulator
ASI
→
ATV (AM)
9.7 Status of device (menu 6)
Name of device, item number, address in head end
ASI input
Status
synchronisation status
Information
details of TS packet length and MPEG
data rate
MPEG Decoder
Status
Synchronisation status for the TS and the
audio and video decoder
The following will only be displayed if the internal AVsync info
option is switched on (see menu 3)
SysClock
details of system timing
AudioSync
extended details of synchronisation sta-
tus of the audio decoder
VideoSync
extended details of synchronisation sta-
tus of the video decoder
Complementary data
Current VPS data
shows detailed information about
current VPS data
Current WSS data
shows detailed information about
current WSS data
The following will only be displayed if the “test lines” option is switched
on:
Test line insertion
Shows which test signal is set for the 4
lines
Status output
Signal level
Shows status of signal level at output
(ok, too high, too low)
Status PLL1/2
Shows whether or not PLL1 (or PLL2) is
activated (ok, not ok)
Sound carrier 1/2
Shows frequency of sound carrier 1 or 2
Software versions
Shows the software versions for the controllers as follows:
- Controller of terminals board
- MPEG Controller
- Controller IF converter
- Download controller for FPGA ASI input
- FPGA ASI input
Information
Temperature AP
Temperature of terminals board
Device number
display of the device number
Device index
display of the device index (hardware)
