16
EMA x08/407
Part N
o
: 917x.xx
ENCODER/ MULTIPLEXER
SDI/ A/V
→
ASI(TS) & IP(TS)
HDMI
→
ASI(TS) & IP(TS)
A
LINE
Device within Cascade:
[1..8]
Device number: to distinguish the installed devices within a cascade. It is used to generate unique program numbers (service
ID) and PID‘s automatically.
Table Extension:
[OFF, ON]
Extension of the device configuration via script programming (expert mode, for example to affect the automatic generated PID
and SID).
“OFF“
no script processing
“ON“
Providing the function call “Table Script“ in the header of the configuration. Script processing enabled.
Notes:
PID/ SID will be assigned to the configured slots (programs, channels) automatically according to a fixed system. By providing unique
device numbers in a cascade as well as clear cascades numbers ensures that the values do not overlap. Are “foreign“ transport
streams on ASI input processed, there is the suppression of such signals by overlapping the SID/ PID values. To avoid this, the device
configuration must be adapted. Where appropriate, with the option “Table Extension“ an individual assignment within the unit genera-
ted PID/ SID is necessary (see table 4 in chapter 3.3.4.2).
3.3.2.2.7 System parameters
Fig. 14: System settings for real time, encoder, fan control
Local Time Offset (to UTC):
This is the difference between local time and “Coordinated Universal Time” (e.g. Germany = 1).
Daylight Saving:
[ON,OFF]
“ON“
automatic daylight saving time switch
Encoder: Show Grid:
[never, Auto (no input), Force (Testmode), Auto (show black)]
Encoder mode, if
SDI input signal is failure
.
“never“:
never displays a test image, if signal is failure, the last valid image is frozen.
“Auto ( no input)“:
automatic display of a test image, if signal is failure
“Force (Test Mode)“:
Test image is constrained, independently from input signal
“Auto (show black)“:
automatic display of a black image if signal is failure
Encoder H.264-SD:
[Show Line 23, Suppress Line 23 (WSS)]
“Show Line 23“: SD-SDI signal is converted with visible WSS line 23 in H.264
“Suppress Line 23 (WSS)“: line 23 is suppressed.
MPEG-2: Audio Frames per PES Block:
[1..4..8]
Encoder parameter of audio block size
FAN “ON“ above Temperature in °C:
[0..50..100]
Switching threshold of the device fan.
