Author: RRi
- 6 -
Version 1.0
Date: 13. July 2017
EMU-8500-series-operation-instructions.docx
MPEG4 HD IP Encoder User Manual
Humidity
Pressure
86~105KPa
Door & Window
Installing rubber strip for sealing door-gaps and dual level glasses for window
Wall
It can be covered with wallpaper, or brightness less paint
Fire Protection
Fire alarm system and extinguisher
Power
Requiring device power, air-conditioning power and lighting power are independent to
each other. Device power requires AC 110V±10%, 50/60Hz or AC 220V±10%, 50/60Hz.
Please carefully check before running.
2.5 Grounding Requirement
•
For safe function all modules’ or the Chassis should be grounded: That is the basis of
reliability and stability of devices. Also, they are the most important guarantee of lightning
arresting and interference rejection.
•
Grounding connection must be installed with a copper conductor in order to reduce high
frequency impedance, and the grounding wire must be as thick and short as possible.
•
Users should make sure the 2 ends of grounding wire are well electric conducted and not
corrosive.
•
It is prohibited to use any other device as part of grounding electric circuit
•
The area of the conduction between grounding wire and device’s frame 19'' rack should
be not less than 16 better 25 mm
2
.
Chapter 3 WEB Interface Setup
The user can control this device and setup the configuration by a computer connected to
the device to its web NMS Port. The user should ensure that the computer’s IP address is
different from the other device’s IP address; otherwise, it would cause IP conflicts.
3.1 Encoder login
The default IP address of this device is 192.168.0.136. Connect the PC (Personal
Computer) and the device with network cable directly (Check usage of crosslink cable
eventually or network interface should support MDI/MDX), or using a at least Fast
Ethernet 100BaseT switch and use a "ping" command to confirm they are on the same
network segment.
I.e. the PC IP address is 192.168.99.252, we then change the device IP to 192.168.99.xxx
(xxx can be 1 to 254 except 252 to avoid an IP conflict).
