BLANKOM HDE-(4)264B/265B User Manual
Version 1.1 – 02-2019
Page - 22 -
techn. data are subject to change w/o notice!
VLC is asking…
BTW: Some settings apply for both Main and secondarys and
are adjusted only in the Mainstream settings, like the
RTSP net-transport mode: UDP or TCP.
BTW2: RTSP is used if need ONVIF (Camera syncs)
as well as TTL, which should be increased.
Direct Streaming to a Unicast Address P2P:
so you set the destination address, while the
receiver must have set your ‘source’ address and port number to receive it from you.
Multicast
(explanations see end of this document):
this is the basic UDP
RTP is used as one Top Layer of UDP, transporting time stamps and additional information.
And a second stream on Port-1 = The RTCP information which the receiver can use to recover
some lost packets. So the receiver should also support RTP. If it doesn’t it uses udp and ignore the RTP
addons.
RTMP-settings:
Internet Video portals often receive your life stream by some particular settings.
