BLANKOM IRD-6100 HD IRD User Manual
BLANKOM_IRD-6100_User_Manual_RR-V1.1-03-2018.doc
- 39 -
ESW
on scrambler side) and Burned Key (Input or
Device
mode on the scrambler side). If user is
selecting Burned Key, it corresponds to the
Device
mode selected on scrambler side; while if
Burned Key is unselected, it corresponds to
Input
mode on scrambler side. The
Input
data is SK on
the IRD. User can input the SK in the column as showed:
Mode E (Buried Key option unselected)
After selecting Mode E and Burned Key unselected, users should input the 16 figures Descrambler
Key and 14 characters SK (the SK data refers to the
Input Data
on scrambler side). Users should
choose the characters from 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, and F. Lastly users press “Set” to
initial descrambling. A few seconds later, the programs will be descrambled.
Mode E (Buried Key option selected)
After selecting Mode E and Burned Key, users should input the 16 figures Descrambler Key (named
ESW on scrambler side). The user should choose the characters from 0, 1, 2, 3, 4, 5, 6, 7, 8, and 9, A,
B, C, D, E, and F. Under this mode, SK cannot be input in the column, as the data which works with
ESW has been embedded inside the device after users select Burned Key (which refers that users
choose
Device
mode on the scrambler side). Lastly users press “Set” to initial descrambling. A few
seconds later, the programs will be descrambled.
Chapter 5 Troubleshooting
Our ISO9001 quality assurance system has been approved by CQC organization for guaranteeing
the products’ quality, reliability and stability. All our products have been passed the testing and
inspection before shipping out of the factory. The testing and inspection scheme already covers all
the Optical, Electronic and Mechanical criteria which have been published by our company. To
prevent potential hazard, please strictly follow the operation conditions.
Prevention Measure
Installing the device at a place in which the environment temperature is between 0 to 45 °C
Note: The Buried Key is embedded in the device and it is solely controlled by the device
supplier.
Note: Under this mode, after inputting the Descrambler Key and SK, it will work out a new
data, which can be seen as the SW in Mode 1. The new data resulted from Descrambler Key
and SK implements descrambling function.
