User Manual professional h.264 & MPEG2 encoder MPE-4000
MPE-4000-MPEG-encoder-manual-RR-03-2018.docx
Page 8 / 44
Front Panel Operation
MPE-4000’s front panel is you operation interface where you configure the device
manually. The LCD is a 2-line x 40-character back-lit dot-matrix you interface with
pushbuttons for
UP, DOWN, LEFT, RIGHT, ENTER, MENU,
and
LOCK button
for front
panel control. You can decide whether to directly use the factory setting, or customize
the input/output parameters and so on.
Keypad Function Description
LEFT/RIGHT :
To choose and set the parameters
UP/DOWN :
Modify activated parameters or page up/down when parameter is
inactivated.
MENU
:
To cancel presently entered value, resume previous setting;
ENTER
:
Activate the parameters which need modification, and confirm the
changes
after modification
LOCK
: Lock the screen / cancel the lock state .After pressing lock key, the system
will question the you to save or not .If not, the LCD will display the
current configuration state
LCD Menu settings
