6
PALIOS-IPM4
Part N
o
: 5105.10
8-fold IP-/ ASI-TV Modulator
IP/ SFP/ ASI (H.264/ AVC, MPEG2)
→
ATV (8x AM)
9. Setting by web interface
To use all functions of the module activate Java Script in your browser settings.
Settings via checkbox are applied immediatelly, but not stored in memory! So they would be lost on a possible restart of the
module. To save these settings the “send“ button must be pressed.
Please send and store your settings by pressing the „send“ button after each change.
9.1 Network connection to the computer
System requirements:
- PC/ laptop with 10/ 100 Mbit Ethernet interface
- Internet browser (e.g. Windows Internet Explorer), JAVA script capable
Setup the connection:
The PALIOS-IPM4 has to be connected to PC network using an Ethernet cable. The default IP address of the module is 192.168.1.100.
In order to access the web interface of the PALIOS-IPM4 from a PC, the PC has to be in the same subnet (192.168.1.XXX; subnet mask
255.255.255.0), where XXX is not used by any other module in this subnet.
If multiple PALIOS-IPM4 are connected to the same network each module must be set to its own unique IP address to avoid address
conflicts.
After these settings, the IP address of the PC has to be adjusted to match the network. Now the modules can be accessed via browser
with the new IP address.
If activated in Setup→GUI Settings→Activate user and keyword check the user has to log in now ( »chapter 8.2.6).
After successful registration or a connection establishment without password (default setting) the start page of the module is displayed
( »chapter 8.2.1).
