7
WLANIOS
Part N
o
: 5161.01
8-port switch with WLAN port
SBL
7.2.2 Network setting
On this page you can configure the parameters of the local network, which connects to the LAN port of the access points. The set-
tings for the IP address, subnet mask, DHCP, etc. are performed.
7.2.3 Wireless setting
On this page you can select the various operating modes of the wireless connection.
The default is the access point mode. In this mode, all Ethernet ports and wireless interfaces bridged together and NAT function is
disabled. All functions that are connected to the WAN, and the firewall is not supported.
In gateway mode, the device supports the connection to the Internet via ADSL/ cable modem. The NAT is enabled and the PC‘s in
LAN ports share the same IP to ISP through WAN port. The WAN connection type can be setup in WAN page by using PPPOE, DHCP
client, PPTP client or static IP.
Finally there is the possibility to operate the device as a client.
