5
6
7
8
9
11
12
1
2 3
10
4
Press the button to rewind gameplay.
Directional Pad (D-Pad)
Directional Pad for game playing.
A
Accessories Information
USB Cable length: 1ft
REWIND
Press the button to display in-game menu.
MENU
Press the button to start the game.
1
7
B
8
C
9
X
10
Y
11
Z
12
2
4
Power Indicator
Press any key and the indicator will light up if there
is still battery power left in the controller.
5
Power
Turn the controller’s power ON/OFF.
6
3
START
NOTE: X, Y, Z functions may
vary depending on game.
ON
OFF
ON
OFF
The image below shows the location of the switches and buttons. Each function is outlined below.
(The illustration is for reference only. Certain controller functions are incompatible with some games.)
Appearance and Key List
NOTE :
If a controller button has not been pressed for a while, the controller will enter standby mode.
Press any button to wake the controller from standby.
Each wireless controller requires 2 AAA batteries, not included.
How TO confirm the wireless controller
connects to the BLAST! HDMI dongle
Controllers from the following previous ATGames consoles are supported: 2018 Blast! consoles (including WD3301, WD3302,
WD3303, WD3304, WD3306) and Sega Genesis Flashback. Others are not supported.
Insert two AAA batteries into
the back of the controller.
1
1
Power on the system. Press any
button on the controller and it
will connect to the HDMI
dongle automatically.
The power indicator won't
blink. It will stay on until you
turn it off or it has entered
standby mode.
2
3
When the power
indicator stops
blinking, you
have completed
pairing.
6
5
Keep pressing and
holding Game key A and
Up on D-pad until the
power indicator starts
blinking.
Turn the
controller’s
power off.
Plug the large end of the
USB cable into a USB
port or USB AC adapter
(not included) to turn on
the HDMI dongle.
After complete Step 3,
use USB cable to
connect the HDMI
dongle and the
Mirco-USB port on TV.
4
NOTE :
Controller will connect to dongle automatically. Pairing is needed only if the controller doesn't work right or a new controller needs to
be connected to dongle.
How To pair the controller with
the BLAST! HDMI dongle
3
1
2
Press and hold Game
key A and Up on
D-pad. Turn the
controller’s power on.
2.4G Wireless Controller
HDMI Dongle
Instruction Manual
Wireless Game Controller
HDMI Dongle INPUT:5V 500mA
