4
OPERATION
Outlets:
The PC904-AV power conditioner provides 9 switched outlets for powering equipment. 8 outlets at rear panel, with 1 front panel outlet.
LED Light Bar with Dimmer Control:
The PC904-AV utilizes a dimmer control for the LED light bar on the front panel. The dimmer knob controls the brightness of The LED light bar. Turn it clockwise
to increase brightness; turn it counter-clockwise to decrease brightness. When the lights are not in use, we recommend turning it counter-clockwise all the way
to OFF.
Retractable Rack Lights:
The PC904-AV provides two retractable light tubes on the rear panel. They allow users to adjust the level of extension of the tubes. When the lights are not in
use, we recommend pushing the fixtures all the way into the chassis (engaging the off switches) to better maximize the life of the LED.
On/Off Rocker Switch:
The front panel on/off rocker switches power on and off to all outlets (including the front panel outlet and USB outlets) as well as the LEDs (including LED light
bar and retractable lights). This 15 amp capacity power switch is specifically designed to stand up to the enormously high inrush current demands of many
power amplifiers.
Circuit Breaker:
If you are not getting any power to the outlets even though the unit is switched on, the circuit breaker might have tripped. To reset the circuit breaker, push the
round reset button located on the front panel.
Digital Voltage Meter:
Blastking’s digital voltage meter continually displays incoming voltage. It offers a laboratory precision digital meter that displays incoming voltage in 1-volt steps.
The voltmeter’s accuracy is ±2 volts.
Electric Current Meter:
Blastking’s Electric Current Meter displays the consumption current. It offers a precision
digital meter that displays consumption current in one decimal place within a typical tolerance of 0.5A.
32mm
32mm
32mm
32mm
43mm
43mm
43mm
