All safety and hazard notices or on the machine must be kept complete and legible.
If safety-critical changes occur to the machine or its working method, the machine
must be shut down immediately. The cause of the fault must be established and
remedied.
Spare parts must comply with the technical requirements specified by the
manufacturer. This is always guaranteed if Blastrac OEM parts are used.
Intervals for recurring checks and inspections specifies in these operating
instructions must be followed.
To perform maintenance work correctly, it is imperative to be equipped with the
proper tools for the task.
The location and the operating of fire extinguishers must be made known to each
work site.
Take note of the facilities for reporting and fighting fires.
Fundamental Duties
Work on the machine may only be undertaken by trained personnel.
Only trained personnel may be employed. Note the statutory minimum age. Clearly
specify the responsibilities of personnel for operation, setting up, servicing and
maintenance work.
Make sure that only authorized personnel operate or work on the machine.
Define responsibilities of the machine operator, with regard to traffic safety
regulations, and inform him not to take instructions from third parties who may not
be complying with the local safety requirements.
Personnel, who are being trained to operate equipment, may only use the machine
under constant supervision of an experienced person.
5
Changes, additions, and conversions to the machine must NOT be made
without the manufacturer’s permission! This applies in the particular to
the fitting and adjustment of safety devices.
Summary of Contents for 1-16DB4-V2
