2-45TDC Operating
Instructions
General
3.6 Control
panel
Please contact
Blastrac
for a complete manual containing the
description of the control panel.
3.7 Air suction system
The air streaming through the complete system during the application of
the blast cleaning machine and the dust collector, has the following
functions:
Cooling of the blast wheels
Cooling of the abrasive
Transport of the abrasive
Transport of dust through the system
Separation of dust from the re-useable abrasive
Transport of dust to the dust collector
Motor output
: 22 kW
Air throughput
: 90 m³/min (5400 m³/h)
Dust hose length
: 2 x 7 m
Dust hose diameter : 150 mm
All connection points must be sealed carefully and the dust hose
must be fixed with hose clamps!
The filter housing must be sealed properly and all sealings must
be in good condition!
If dust leaves the dust collector instead of clean air, this is a sign
that the filter cartridges are either damaged or not fixed correctly
inside the filter chamber.
5
