2-45D
Operating Instructions
General
3
Initial commissioning of the machine must be carried out very
carefully. The machine operator must fully understand the sequence
of commissioning of the individual parts and their functioning.
All persons in the proximity of the machine in operation must wear
ear protectors, safety glasses with lateral protection and safety
shoes. The machine operator must wear close-fitting protective
clothing.
3.3 Hydraulic connections
Flow
Pressure
Blast wheel drive
2 x 64 l/min
210 bar
Magnet drum motor
8 l/min
100 bar
Blower motor
63 l/min
180 bar
Required hydraulic flow: min. 200 l/min at 230 bar
Required cooling capacity: min. 50 kW
Required oil tank: min. 350 liters
Required drain lines for blast wheel motors: min. 1/2"
.....
Please contact
Blastrac
to get more details about other (hydraulic)
requirements for the 2-45D machine.
3.4 Care and maintenance
Special attendance and regular maintenance of the machine and its
parts are imperative for functioning and safety.
In order to prevent unnecessary downtimes it is recommended to
keep original spare and wear parts on stock as listed in the
maintenance box.
A list of contents of the maintenance box is provided in Chapter 10 to
enable the above-mentioned work to be carried out quickly.
