Service Manual
Side shift & adapter 2-45D
Initial operation
2
5.1 Preparations for initial operation
All persons in the proximity of the side shift and machine adapter
must wear safety shoes. The operator is obliged to wear close-
fitting protective clothing.
Handle all hoses and operating devices with care.
Works on the hydraulic system must only be carried out by qualified
specialists.
Check the surface to be treated for loose parts (stones, screws, etc.).
The surface must be swept if necessary. Make sure that the blast
cleaning machine can travel over all inequalities on the surface. Small
inequalities like weld seams or floor joints are no barriers for the
machine and its adapter.
Regular inspection is important in order to avoid downtimes. Carry
out the following checks before any start-up:
;
Check whether all side shift and machine adapter parts are
assembled safely and correctly.
;
Check all screws and other fasteners for tight seat.
;
Check all hydraulic connections and hoses for oil leakage.
Before start-up the operating personnel must be familiar with the
safety regulations
given in this manual and with the
service
manual
supplied with this blast machine.
5.2 Initial
operation
All persons in the proximity of the side shift and machine
adapter must wear safety shoes. The operator is obliged to
wear close-fitting protective clothing.
For illustrations and detailed description of the controls please contact
your truck supplier.
