18
Prior to any repair works on the dust collector and its drives, secure the dust collector against
unintentional switching on. Put the dust collector to its safety off position.
Also make sure there is
no air pressure on the pulse system.
The machine is in a safe condition when it cannot generate any
hazard.
Follow additional operating and maintenance instructions of Original Equipment Manufacturers if
included during your service and maintenance work.
Further is advised:
Store the cleaned and dry machine in a dry and humid free room. Protect the electrical motors from moisture,
heat, dust and shocks.
All repair work must to be done by qualified Blastrac personnel, this to guarantee a safe and reliable machine.
Any guarantee on the machine is expired when:
Non original Blastrac parts have been used
Repair work is not done by qualified Blastrac personnel
Changes, add on’s or conversions are undertaken without written permission of Blastrac BV
Screws, bolts etc. that have been removed must be replaced with those of the same quality, strength, material
and design.
Do not weld, flame cut or perform grinding works on or near the machine. Danger of fire or explosion exists!
Provide adequate ventilation when working in a confided space.
Secure the maintenance area if necessary.
