Blastrac BDC-1133PH Original Operating Instructions Download

Page: 37 / 364

*) Optional accessories / Option depending on model
Original instruction

BLASTRAC BDC-1133PM / BDC-1133PH / BDC-1133PHC

SLO

RUS

EST

5 Maintenance

5.1

Regular servicing and inspection

Regular servicing and inspection of your machine
must be carried out by suitably qualified personnel in
accordance with relevant legislation and regulations.
In particular, electrical tests for earth continuity, in-
sulation resistance, and condition of the flexible cord
should be checked frequently.

In the event of any defect, the machine must be
withdrawn from service, completely checked and
repaired by an authorized service technician.

At least once a year, a Blastrac/Diamatic technician
or an instructed person must perform a technical
inspection including filters, air tightness and control
mechanisms.

Appliances in Dust Class H must have their filtration
efficiency checked once a year. The result must be
presented upon request. If the effiency of the filter
does not fulfil the requirements for Dust Class, the
filter must be replaced.

5.2

Maintenance

Remove the plug from the socket before performing
maintenance. Before using the machine make sure
that the frequency and voltage shown on the rating
plate correspond with the mains voltage.

The machine is designed for continuous heavy work.
Depending on the number of running hours – the
dust filter should be renewed. Keep the machine
clean with a dry cloth, and a small amount of spray

polish.

During maintenance and cleaning, handle the ma-
chine in such a manner that there is no danger for
maintenance staff or other persons.

In the maintenance area
•

Use filtered compulsory ventilation

•

Wear protective clothing

•

Clean the maintenance area so that no harmful
substances get into the surroundings.

CAUTION

In the case of asbestos abatement wear ad-
ditional single-use clothing. Wear a P3 breath-

ing mask.

Before removing the machine from the area contami-
nated with harmful substances:

1. Clean the outside of the machine, wipe it clean

or pack the machine in well sealed packaging
and avoid spreading deposited harmful dust.

2. After use, in asbestos contaminated areas, the

machine must be cleaned by an authorised per-
son according to TGRS 519.

During maintenance and repair work all contami-
nated parts that could not be cleaned satisfactorily
must be:
•

Packed in well sealed bags

•

Disposed of in a manner that complies with valid
regulations for such waste removal.

For details of after sales service contact your dealer
or Blastrac/Diamatic service representative respon-
sible for your country. See reverse of this document.

6 Further information

6.1

EU Declaration of conformity

We,
BLASTRAC B.V.
Utrechthaven 12
3433 PN NIEUWEGEIN
The Netherlands

hereby declare, that the products
Blastrac / Diamatic Pulse Dustcollector for
Commercial/Industrial use – Wet and dry

Description:
220-240V; 100-120V; 1~, 50/60 Hz, IPX4

Type

BDC-1133PM-**** , BDC-1133PH-**** and
BDC-1133PHC-****

are in compliance with the following standards:
EN 60335-1:2012+A11:2014
EN 60335-2-69:2012
EN 55014-1:2006+A1:2009+A2:2011
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 50581:2012

Following the provisions of:
Machinery Directive 2006/42/EC
EMC Directive 2014/30/EC
RoHS Directive 2011/65/EC

Nieuwegein, 21-06-2017

Michiel Kalisvaart
Operational Manager

Authorised representative and authorised to compile
the technical file.

The four asterisks indicate different versions and

features.