Operating Instructions
BG-250G11/G13
Operation
November 2004
© Copyright Blastrac
39
Revision (A) 12-23-04
6.6 Procedures after lengthy down time
1
Steps before storage
If the
Blastrac
grinding machine will be stored for a long period or time, follow
the below steps:
;
Rest the machine onto the jack stand so that the brush seals and
the flexible coupling are not touching the floor.
;
Clean the machine and cover it with a tarp.
;
Empty gasoline tank
;
G13: Disconnect battery terminals
2 After
storage
;
Be sure all fasteners are tight and secure.
;
Check to make sure the flexible coupling is not deformed.
;
Check engine oil level.
;
Fill with gasoline
;
Before starting engine, turn Honda switch to OFF and pull the
starting chord a few times to circulate engine oil.
;
Test that the emergency stop switch is working correctly.
Follow steps in Chapter 5 “Initial operation”.
