12
4.3
Manual moving of the machine
To move the machine, first lock the floating shroud. After locking the floating shroud, press down the
handgrips of the machine until the front part rises from the ground. It can now be pushed around on its
wheels.
The machine should only be moved around when the dust hose and power supply cable are disconnected.
WARNING!
Always make sure all rotating parts have come to a complete standstill before moving around the
machine.
Be careful! Make sure nobodies feet get under the wheels. Wear appropriate safety shoes when you drive the
machine to or from the work area.
Locking the floating shroud for transporting the BMG 444.
-
There are sleeves on both sides to lock the floating shroud.
Step 1. Lift up the floating shroud.
Step 2. Turn the floating shroud
counterclock wise. And it will slide in the
sleeves. Now the floating shroud is
locked. To unlock the floating shroud,
Procede the process backwards.
Summary of Contents for BMG-444
