20
5.3 Speed control version
The machine is also available in a speed control version. All the points during operating machine are similar to
the standard version. The difference is in control panel which give option to change the speed of grinding
heads.
Switch on the machine
Connect the dust hose to the machine and turn on the dust collector before switching on the machine.
Stand behind the machine and hold the handle (5) tight.
Be sure that the emergency switch (1) is turned up.
Turn the speed regulation button (3) counter clockwise so the machine will turn as slow as possible.
Turn the Left/Right button (4) to one of the positions.
To start the machine, push the green Start button (2).
Raise if necessary the speed of the machine with the speed regulation button (3)
Switch off the machine
Push the red (emergency) button (1) on the electrical box.
Wait until the machine stops rotating before laying down the machine on the metal support.
Pull out the power supply.
Shut down the dust collector.
Summary of Contents for BMG-444
