10
Controlling the Blasthead
•
Pressing the free flow button (button will illuminate) (1) will lower the Blasthead down to the ground.
There is a 5 second delay for the blast head to lower.
•
To raise the Blasthead
make sure the “
Blasthead Free Flow
”
button is not illuminated, then press and hold
the
“blasthead
up
”
button (2) until the castors on the head are off the ground.
•
The Clutch On Button (3) will engage the clutch and run up the blast wheel.
•
The Clutch Off Button (4) will disengage the clutch turning the blast wheel off.
•
The Shot Valve Open Button (5) will engage the linear actuator opening the shot valve on the blast head.
•
The Shot Valve Close Button (6) will disengage the linear actuator closing the shot valve.
1
2
4
3
5
6
