12
6. Maintenance
Warning: Engine, exhaust system and hydraulic component temperatures could
be in excess of 200
F causing severe burns if touched.
Pay attention to Chapter 3
"Safety"
during maintenance and repair works.
Failures due to inadequate or incorrect maintenance may generate very
high repair costs
and long downtimes of
the BMR-25P.
Regular
maintenance, therefore, is imperative.
Operational safety and service life of the shot blaster depend, among other things, on proper maintenance.
Maintenance Schedule
The time indications are based on uninterrupted operation. When the indicated number of working hours is not
achieved during the corresponding period, the period can be extended. However a full overhaul must be carried out
at least once a year.
Due to different wo
rking conditions it can’t be foreseen how frequently inspections for wear ch
ecks, inspection,
maintenance, and repair work ought to be carried out. Prepare a suitable inspection schedule considering your own
working conditions and experience.
Our specialists will be happy to assist you with more advice.
Store the cleaned and dry machine in a dry and humid free room. Protect the components from moisture, heat,
dust and shocks.
All repair work must to be done by qualified Blastrac personnel, this is to guarantee a safe and reliable machine.
Any guarantee on the machine is void when:
▪
Non original Blastrac parts have been used
▪
Repair work is not done by qualified Blastrac personnel
▪
Changes or conversions without the express written consent of Blastrac NA
Grease Blastwheel Bearings Using High Temp Grease
(Blastrac Part Number
–
02300001)
Daily
Check Oil Levels
Daily
Check Blasthead Blade Wear
Daily
Rotate Pinch Bar
Daily
Check that Safety Devices are Working Properly
Daily
Check Blasthead Seal Wear and Adjust Accordingly
Daily
Change Engine Oil/Filter
Every 100 HRS
Change Engine Air Filter
Every 200 HRS
Change Hydraulic Oil/Filter
Every 500 HRS
