11
Controlling the Blasthead
Pressing the free float button (1) will lower the Blasthead down to the ground. To raise the BlastHead hold the up
button (2) until it is at the desired height. The Clutch On Button (3) will engage the clutch and run up the blast
wheel and blower. The Clutch Off Button (4) will disengage the clutch turning the blast wheel and blower off. The
Shot Valve Open Button (5) will engage the linear actuator opening the shot valve on the blast head. The Shot
Valve Close Button (6) will disengage the linear actuator closing the shot valve.
1)
Blasthead Free Float
2)
Blasthead Up
3)
Clutch On
4)
Clutch Off
5)
Shot Valve Open
6)
Shot Valve Close
1
2
5
6
4
3
