13
6. Maintenance
Warning: Engine, exhaust system and hydraulic component temperatures could
be in excess of 200
F causing severe burns if touched.
Pay attention to Chapter 3
"Safety"
during maintenance and repair works.
Failures due to inadequate or incorrect maintenance may generate very
high repair costs
and long downtimes of
the BMR-75D.
Regular
maintenance, therefore, is imperative.
Operational safety and service life of the shot blaster depend, among other things, on proper maintenance.
The following table shows recommendations about time, inspection, and maintenance for the normal use of the shot
blaster.
Operating hours/
time period
Inspection points, maintenance instructions
12 h after repairing
Check all accessible screw connections for tight seat.
Daily and prior to
starting work
Check all safety devices working adequate.
Check the function of the residual current operated device.
Check the hose connections for tightness and fixed seat
.
Check the electric connections for sediments of dirt or foreign bodies.
Grease all the grease zerks on the bearings
Rotate the pinch bar
Annually
Full overhaul and cleaning of the complete machine.
The time indications are based on uninterrupted operation. When the indicated number of working hours is not
achieved during the corresponding period, the period can be extended. However a full overhaul must be carried out
at least once a year.
Due to different working conditions it can’t be foreseen how frequently inspections for wear ch
ecks, inspection,
maintenance, and repair work ought to be carried out. Prepare a suitable inspection schedule considering your own
working conditions and experience.
Our specialists will be happy to assist you with more advice.
