8
www.blaubergventilatoren.de
VENTO V50-1 / V50-1 S / V50-1 Pro / V50-1 S Pro
3
. Fix the inner part of the telescopic air duct on inner wall side using the
screws 3x25 from the delivery set, Fig. 11.
4
. Fill the gaps between the wall and the telescopic air duct with a mounting
foam, Fig. 12.
Fig. 11. Fixation of the telescopic air duct.
Fig. 12. Size of the core hole
5.
Install the filter and the ceramic regenerator in the air duct, Fig. 13.
6.
Mark and drill the fastening holes for the back part of the ventilation unit,
Fig. 14.
7.
Remove a screw from the bottom part of the ventilation unit and take off
the front grille.
8.
Insert the dowels 5x25 in the wall and fix the ventilation unit to the wall
with the screws 3x25 from the delivery set.
9.
Mark the fastening holes for the outer ventilation hood:
•
Abb. 15a − for VENTO V50-1.
•
Abb. 15b − for VENTO V50-1 S.
Drill 40 mm holes for the dowels 6x40.
Fig. 14. Hole marking for the ventilation unit
Ø6 mm
4 holes
150 mm
196 mm
170 mm
195 mm
Fig. 13. Mounting of the unit components
Fig. 15a.
Fig. 15b.
193,5 mm
Ø6 mm
4 holes
246,4 mm
Ø6 mm
4 holes
220 mm
220 mm
10.
Insert the dowels 6x40 from the delivery set into the holes.
