www.blaubergventilatoren.de
KoMFort roto ec S6(e)K 200
5
PURPOSE
The unit is designed to ensure continuous mechanical air exchange in houses, offices, hotels, cafes, conference halls, and other utility
and public spaces as well as to recover the heat energy contained in the air extracted from the premises to warm up the filtered stream
of intake air.
The unit is not intended for organizing ventilation in swimming pools, saunas, greenhouses, summer gardens, and other spaces with
high humidity.
Due to the ability to save heating energy by means of energy recovery, the unit is an important element of energy-efficient premises.
The unit is a component part and is not designed for stand-alone operation. It is rated for continuous operation.
Transported air must not contain any flammable or explosive mixtures, evaporation of chemicals, sticky substances, fibrous materials,
coarse dust, soot and oil particles or environments favourable for the formation of hazardous substances (toxic substances, dust,
pathogenic germs).
THE UNIT SHOULD NOT BE OPERATED BY CHILDREN OR PERSONS WITH REDUCED
PHYSICAL, MENTAL, OR SENSORY CAPACITIES, OR THOSE WITHOUT THE APPROPRIATE
TRAINING.
THE UNIT MUST BE INSTALLED AND CONNECTED ONLY BY PROPERLY QUALIFIED
PERSONNEL AFTER THE APPROPRIATE BRIEFING.
THE CHOICE OF UNIT INSTALLATION LOCATION MUST PREVENT UNAUTHORIZED
ACCESS BY UNATTENDED CHILDREN.
DELIVERY SET
Name
Number
Air handling unit
1
User's manual
1
Control panel*
1
Decorative panel
1
Decorative panel mounting bracket
4
Fastening kit
1
Packing box
1
*The control panel is not included in the delivery set of the units with the S21 controller.
DESIGNATION KEY
KOMFORT Roto
EC S 6 E 200 S21
Control
S21/S22
Rated air flow [m
3
/h]
Additional components
K – kitchen hood
E – electrical heater
Casing type
6 – casing with a thin kitchen hood
Spigot orientation
S – vertical
Motor type
EC – electronically commutated
Series of units
KOMFORT Roto — heat recovery air handling unit with a rotary heat exchanger
