www.blaubergventilatoren.de
Helix/s-Vent
10
MOUNTING STEPS FOR THE FAN HELIX
• Make sure that the motor is disconnected from power supply (Fig. 1).
• Mark holes on the mounting surface for mounting of the fixing bracket (Fig. 2).
• Bore holes and fasten the fixing bracket using the appropriate fasteners (i.e. expansion anchors). In case of need use the vibration
dampers VVCr or VVCp (specially ordered accessories), (Fig. 3).
• Provide reliable grounding of the fan (Fig. 4).
• Connect the air ducts to the fan. On the air intake side install the flange FVC-
Helix
, FVC-S-Vent (specially ordered accessories) (Fig.5) or
the protecting grille RVC-
Helix
, RVC-S-Vent (Fig. 6).
1.
2.
3.
4.
5.
6.
S1
